CNC Polygon Turning Machine-Polygon 5A

CNC Polygon Turning Machine-Polygon 5A
CNC Polygon Turning Machine-Polygon 5A


The Polygon-5A model has four servo motors – three for driving axes (X,Y&Z) and one for driving tool holding spindle while one spindle motor is used as work holding spindle. Two spindle motors has been designed to run with any speed ratio with very good synchronization and ensures very high precision and accuracy for the components. The servo motors are equipped with high resolution absolute encoders for reference-free operation.This model has as four servo motor- three for driving Axes (X,Y&Z ) and one for driving live tool spindle and one spindle motor is used as work holding spindle.This machine is suitable for Polygons, ratchets, Slot cutting and Splines. Any Profile with radius, chambers and taper can be easily generated and the Polygon can be generated at any position on the component. The Tool head can be tilted to 90degrees vertical on either side. The machine can also be used as two Axes Polygon turning machine when the tool head is horizontal .Rigid in construction and reliable


Workpiece holding chuck Colet chuck –A42 (Standard)
Work piece machining dia (Max) mm 100
Machining length (Max) mm 150
X axis Stroke mm 130
Y axis Stroke mm 70
Z axis Stroke mm 200
Max, speed (rpm) rpm 2500
Spindle Bore mm 55 (standard)
Chucking cylinder P-80 (standard)
Spindle Motor HP/rpm 5.5/6000
Tool Holding Servo Motor Nm/rpm 12/3000
Hydraulic Motor HP /rpm 1 /1440
Centralized Lubrication kW 0.12
x-axis servomotor Nm/rpm 6/3000
Y-axis servomotor Nm/rpm 6/3000
Z-axis servomotor Nm/rpm 12/3000
Coolant pump Kw 0.1
Control Voltage Volts 220VAC/24 VDC
Main Power supply Kw 3phase,415VAC+_10% 50HZ
Machine dimension mm W1500x H1550x L1780
Packing dimension mm W1800xH1700x L2100
N.W /G.W Kgs 1800/ 2200